The Use fast mode check box will select a processing mode that will skip undo list processing and object merging operations for speed and reduced memory use. This may be desirable for large jobs containing complex cells, which may take a long time to process. In this mode, there is no ``undo'' capability, however.
If the Use object merging when flattening check box is checked, the new object merging will be performed when objects from the subcells are promoted to the current cell. This is the same merging as specified in the Editing Setup panel from the Edit Menu. Use of full polygon merging can greatly increase processing time, simple box clipping/merging has much lower overhead. Merging will generally reduce the object count in the layout.
The Flatten button on the pop-up initiates the operation. The subcells to be flattened must have been selected at this point.
Pressing Ctrl-c will pause the process, and give the user the option of terminating the job. It is usually not desirable to stop in the middle of a flatten operation, but invoking this prompt may reassure the user that the operation is in progress and not ``hung''.
In electrical mode, symbolic instances and library devices are never flattened, they are considered atomic. If you must flatten an instance that is displayed symbolically, the instance must first be forced to display as a schematic, either by reverting its master to non-symbolic temporarily, or by adding a NoSymb property to the instance with the Property Editor.